Precautions for the use of automobile hydraulic force shear

Automobile hydraulic force shear is a tool used for cutting metal materials. The precautions for its use are as follows: Preparation before operation: Check the engine performance and hydraulic system of the force shear to ensure that all kinds of oil are sufficient. Open the appropriate hydraulic brake valve. Connect the shearing working part of the large force shear with the power part (usually connected according to the inlet and return oil circuit of the hydraulic part). After completing the above steps, you can start the operation. Key points for operation: it is forbidden to hold the object to be cut by hand during cutting. This is because the hydraulic shear force generated at work is very large, directly by hand to take the shear may lead to serious personal injury. When shearing, the closing of large force shear should be carried out slowly. An excessively fast closing speed may result in a momentary increase in shear forces, increasing the risk of equipment damage, and may result in inaccurate shearing. It is forbidden to stand on both sides of the object to be cut during shearing. Because there may be metal fragments splashing during the cutting process, or accidents in the equipment, causing injury to people around. Maintenance and maintenance: regular maintenance and maintenance of hydraulic shear, including cleaning, lubrication and inspection of the wear of the parts. If the equipment is found to have abnormal sound, vibration or leakage, etc.

Automobile hydraulic force shear is a tool used to cut metal materials. The precautions for use are as follows:

Preparation before operation:

Check the engine performance and hydraulic system of the large force shear to ensure that all kinds of required oil are sufficient.

Open the appropriate hydraulic brake valve.

Connect the shearing working part of the large force shear with the power part (usually connected according to the inlet and return oil circuit of the hydraulic part).

After completing the above steps, you can start the operation.

Key points for operation:

During the cutting process, it is forbidden to hold the object to be cut by hand. This is because the hydraulic shear force generated at work is very large, directly by hand to take the shear may lead to serious personal injury.

When shearing, the closing of large force shear should be carried out slowly. An excessively fast closing speed may result in a momentary increase in shear forces, increasing the risk of equipment damage, and may result in inaccurate shearing.

It is forbidden to stand on both sides of the object to be cut during shearing. Because there may be metal fragments splashing during the cutting process, or accidents in the equipment, causing injury to people around.

Maintenance and maintenance:

Regular maintenance and maintenance of hydraulic shears, including cleaning, lubricating and checking the wear of various parts.

If the equipment is found to have abnormal sound, vibration or leakage, it should be stopped immediately for inspection and troubleshooting.

Safe operation:

In the use of hydraulic shear, should comply with the relevant safety procedures to ensure the safety of the operator.

Wear appropriate protective equipment such as helmets, safety goggles and gloves during shearing.

Do not perform any maintenance or adjustment work on the equipment until the equipment is completely stopped and the power is disconnected.

Please note that the above precautions are for reference only, and specific usage methods and precautions may vary depending on the device model, brand and use environment. Therefore, before using the automotive hydraulic shear, please be sure to carefully read the operating instructions of the equipment and follow the relevant safety operating procedures.